Hardware Compatibility

Everything Ranch Systems
connects to

The RS130 and RS330 nodes support analog (4–20 mA, 0–5 V), digital (pulse, dry contact), and serial (RS-485/Modbus) inputs — so virtually any sensor in the field can feed data into your Ranch Systems account.

We connect to Modbus RTU / RS-485 SDI-12 4–20 mA 0–5 V Analog Pulse / Dry Contact RS-232 — if your device uses SDI-12 or Modbus, we can make it work. New sensors may require firmware development, but we've done it before. Talk to us →

Weather & Environment

RX40 Professional Weather Station
Mini Weather Station (RS10-compatible)
Professional Wind Speed & Direction Sensor
Professional Rain Gauge
Professional Solar Radiation Sensor (Pyranometer)
Leaf Wetness Sensor
ATMOS 14 — Temp / Humidity / Barometric Pressure / Vapor Pressure
Temperature & Humidity with Radiation Shield
Open Air Temperature Sensor (SDI-12)
Bluetooth Temperature & Humidity Beacon
Air Quality / Particulate Matter Sensor

Soil

AquaCheck Subsurface Soil Moisture Probe (300 – 1500 mm)
METER Group Teros 12 — Soil Moisture, Temperature & EC
Sentek Drill & Drop — Moisture & Temperature (10 – 120 cm)
Sentek Drill & Drop TriSCAN — Salinity, Moisture & Temperature
WaterMark Granular Matrix Soil Moisture Sensor
FloraPulse MicroTensiometer
Custom EnviroSCAN Probe

Water & Flow

Optical Water Meter Reader (mechanical flow totalizers)
Netafim Flow Sensors (¾" – 3" pipe)
Pressure Transducer — 0–250 PSI
Pressure Transducer — 0–500 PSI
Submersible Water Level Sensor (50 ft or 100 ft cable)
Deep Well Water Level Sensor (custom depths to 690 ft)
Well Bubbler Water Level Sensor

Power & Control

AC Current Sensor — up to 200A (clamp-on)
Variable Frequency Drive Interface — Yaskawa, Danfoss, Franklin Electric & more (RS-485/Modbus)
Pump On/Off Control Relay Kit
Engine Controllers (RS-232 / RS-485)

Cameras

2.0 Megapixel Outdoor Daytime Camera

Don't see your sensor?

If it outputs a standard signal — SDI-12, Modbus RTU over RS-485, 4–20 mA, 0–5 V analog, pulse, or dry contact — there's a good chance we can connect it. Reach out and we'll confirm compatibility.

Ask about your sensor →